Canterbury Leagues Custom Lighting Part 2
Canterbury Leagues Club Custom Architectural Lighting – Part 2
Modern Architectural Hospitality Lighting – Canterbury Leagues Club is one of Sydney’s premier hospitality destinations with 5 star amenities including restaurants, coffee shops, multiple bars and entertainment lounges and a 24 hour health club. It is currently undergoing significant refurbishment and extension to multiple areas in a staged development process.
Aglo Custom team have been involved in the concept ideation and fabrication process of numerous light features across three tender packages. At the time of writing in August 2017, we have delivered eight of the pieces which are located around the Bakery Café and corridor, library, banquette and lounge areas. Another nine items are either in design progress or awaiting installation. The project’s initial purchase orders were provided in March 2016.
Each piece is the final result of a creative design collaboration where the original concept for each piece was provided to Aglo by Point of View lighting designers and Altis architects.
Fitting Descriptions – Part 2
The Library Chandelier was a collaborative effort between Aglo Custom, Point of View lighting design and Altis architects. It was made from electroplated steel frame work suspended from the ceiling. A total of 30 hand cut crystal droppers suspended from black fabric cable, are each illuminated by a G9 LED lamp.
The Banquette Chandelier is a simplistic bent tube light, which is arranged in a semi-circle around a pole. It takes one individual tube design and places 13 of them together to create an interesting feature, manufactured by mandrel bending a steel tube at both ends. A custom made spinning was also manufactured to conceal the lamp holder. The feature was fixed to the ceiling with a canopy, which conceals the power cable on one end and the wire suspended on the other. A single E27 light bulb, illuminates each tube section.
The architectural light fitting on the lounge area consists of three mandrel bent and welded tubes which were polished and then electroplated in a brushed dark brass finish. An eye turning feature is the laser cut and rolled decorative mesh placed in front of the three E27 LED lamps. Four fittings were supplied for this room.